Cover Plate for Track SL-44-B1
Cover plate suitable for OZ-SL-44-B1 Track
Hard plastic
Provided with grub screw and nut
Great look when the hollow track is covered
Prevents entry of dust, dirt etc. in to the track
As the drawings show(Five doors open to either side only).
The width of each glass door size should be less than 800mm
Panels Width/Height must be Calculated as per formula given below.
Above Gaps shown in elevation must be maintain during the installations.
ALREADY INCLUDED IN FORMULA
DO NOT DEDUCT SEPARATELY.
H= CLEAR HEIGHT FROM TOP OF TRACK TO FLOOR LEVEL
E= Should be less than or equal to 800
0.5W=Half of Clear width at site
Specification:
       Upper & lower door strips OMPS W-5
Fixed to Top/ Bottom of Sliding Panel Without Roller/Surface Bolt .
Casting Material:-Aluminium.
Cover Material:-SS-304
Finish:-SSS
OMPS-W SYSTEM SPECIFICATION
Sliding Folding System
Do not required space for making parking.
Each Panels move linearly into Aluminium top track Channel (75X75) of Aluminium Finish, hung with help of nylon roller fixed with top rail/Profile of SS-304 material and Aluminium Finish.
Each Panels are integrated to each-other with help of SS-304 hinges fixed at top/Bottom profile.
Top track of Aluminium (75X75),hung to MS structure or solid concrete (NOT IN OZONE SCOPE).
Bottom rail would be lock into the floor with dust excluding socket of SS-304.
Each would would be stack/park at designed(AS PER DESIGN PROVIDE BY OZONE DEPEND UPON THE DOOR CONFIGURATION).
Max Height:- 3000mmMax widht:- 1000mmMax Glass Thickness:- 12mm Toughened GlassMax Weight :-90kg
Specification:
       Upper door strip (hinge + roller) OMPS Z-3
Upper door strip with side hinge and roller).
Casting Material:-Aluminium Alloy.
Cover Material:-SS-304
Finish:-SSS
OMPS-W SYSTEM SPECIFICATION
Sliding Folding System
Do not required space for making parking.
Each Panels move linearly into Aluminium top track Channel (75X75) of Aluminium Finish, hung with help of nylon roller fixed with top rail/Profile of SS-304 material and Aluminium Finish.
Each Panels are integrated to each-other with help of SS-304 hinges fixed at top/Bottom profile.
Top track of Aluminium (75X75),hung to MS structure or solid concrete (NOT IN OZONE SCOPE).
Bottom rail would be lock into the floor with dust excluding socket of SS-304.
Each would be stack/park at designed(AS PER DESIGN PROVIDE BY OZONE DEPEND UPON THE DOOR CONFIGURATION).
Max Height:-3000mm Max widht:- 1000mm Max Glass Thickness:- 12mm Toughened GlassMax Weight :-90kg
Converts existing manual sliding door/window into automatic
Suitable for residential applications
Accessories:
With 2 Nos. wireless push buttons/remote control
Best choice for professionals who wish to create pure beauty & graceful architecture
Manufactured as per ISO 9001:2000 standards
CE conformity & compliant with EU Standards EN 16005, EN 60335, EN ISO 13849 1:2008 & German standard DIN 18650
Exquisiteness combined with strength & soft performance
Ability to work with 20% higher or lower than nominal input voltage
Completely protected system input ports which reduces the damage risk due to human error during installation
Self-diagnose and error detection
Ability to automatically adjust speed and slopes according to input voltage change
Brushless Motor
Designed in compliance with EN 16005 Low Energy Operating Standard for 500,000 cycles
Slim Track Size (mm): (H)75 x (D)77 x (L)2000
Can be converted to semi-automatic & manual sliding system
Engine case height: 115mm
Self-learning microcomputer processing controller
Extra slim type track
24V DC 100 watt brushless motor with built-in rectifier
Adjustable parameters
Track length option:
4.2mtr / 6mtr
Accessories:
2 remotes are provided
Single sliding glass door for office, kitchen, living room and pocket doors
Elegant and slim design
Can be mounted on Glass, Wall and Ceiling
No cutout/holes required for glass doors
Internationally patented in Germany as per EN1527 standards
Roller tested for 100,000 cycles
Energy efficient - prevents AC loss by allowing minimum 5mm gap between sliding & fixed glass
Soft closing Single Sliding Wooden Door
Suitable for Office, Kitchen, Living Room and Pocket Doors
Elegant and Slim design
Systems can be mounted on Glass, wall and ceiling.
Internationally patented in Germany as per EN1527 standards
Roller tested for 100,000 cycles
Hydraulic soft closing bumper-Tested for 2,00,000 impact cycles
Energy efficient - prevents AC loss by allowing minimum 5mm gap between sliding & fixed glass
Adjustable soft closing pulling force for different door weight 40-80 kgs
Soft Closing Single Sliding Glass Door for Office, Kitchen, Living Room and Pocket Doors
Elegant and Slim design
Can be Mounted on Glass, Wall and Ceiling.
No Cutout/Holes Required for Glass Doors.
Internationally patented in Germany as per EN1527 standards
Roller tested for 100,000 cycles
Hydraulic soft closing bumper-Tested for 2,00,000 impact cycle
Energy efficient - prevents AC loss by allowing minimum 5mm gap between sliding & fixed glass
Adjustable soft closing pulling force for different door weight 40-80 kgs
Bottom Rail
With variable pivot point of 55/65mm
With clip on covers
Bolts from opposite sides make unauthorized removal virtually impossible.
To accept the Spindle of Ozone floor springs
Door held by friction grip
No need of glass preparation
Gives more strength and rigidity to the door structure.
Comes with in-built lock with a euro profile cylinder
Finish: SSS clip on cover
Available sizes in 1mtr & 1.5mtr.
Top Rail
With variable pivot point of 55/65mm
With clip on covers
Bolts from opposite sides make unauthorized removal virtually impossible.
To accept the Pivot of OPF-1, OCPF-1 or OFS-ACC-GDP
Door held by friction grip
No need of glass preparation
Gives more strength and rigidity to the door structure.
Finish: SSS clip on cover
Available sizes in 1mtr. & 1.5mtr.
System with Accessories for 200kg. Frameless Sliding Door
Each set comprises of - 2 Standard Rollers - 2 Stoppers - 1 Floor Guide
Suitable Track - OZ-ESL-TRACK-E2 (Not included in set)
For frameless panel of 200kg.
Material : Aluminium with SS Finish
System with Accessories for 80kg. Frameless Sliding Door
Each set comprises of - 2 Standard Rollers - 2 Stoppers - 1 Floor Guide
Suitable Track - OZ-ESL-TRACK-E1 (Not included in set)
For frameless panel of 80kgs.
Material : Aluminium with SS Finish
System with Accessories for 120kg. Frameless Sliding Door
Each set comprises of - 2 Standard Rollers - 2 Stoppers - 1 Floor Guide
Suitable Track - OZ-ESL-TRACK-E2 (Not included in set)
For frameless panel of 120kg.
Material : Aluminium with SS Finish
Standard system includes
Sliding Roller 4pcs.
Wire Holding Brackets 4pcs.
Stopper 4pcs.
Wire Assembly & Cable set
Floor Guide 2pcs.
Suitable for Frameless Glass Door of 8mm & 10mm
Max. Door width 800mm per panel
Max. Door weight 60kg. per panel
Compatible track OZ-ESL-TRACK-E4 & Cover OZ-ESL-TRACK-E4-COVER (not included in set)
System with Accessories for 60 kg. Frameless Sliding Door
Each set comprises of - 2 Standard Rollers - 2 Stoppers - 1 Floor Guide
Suitable Track - OZ-ESL-TRACK-E1 (Not included in set)
For frameless panel of 60 kgs
Material : Aluminium with SS Finish
Shower Threshold ( Accessory to be ordered apart from the set)
Available in Standard Length of 900mm
Ensures water tightness outside shower area
Connected with floor guide – SL-ED-11-A4
Stainless Steel 304
Finish-PSS
Glass Connector
Single point fixing on to each glass
Adjustable distance to take care of glass preparation inaccuracies (10mm)
Stainless Steel Grade 304
Finish: SSS
Sliding Door Roller Assembly
Large diameter rollers
Door held at two points
Countersunk glass preparation for better grip
Suitable for 150Kg. door weight application
Stainless Steel Grade 304
Finish: SSS
Glass to Track Clamp
Single point fixing
Secure hold of track with glass
Perfect curvature to hold the track
Clamp in two parts to prevent any movement of track
Stainless steel grade 304
Finish: SSS
Roller Assembly
Four fiber reinforced plastic rollers of 30mm diameter
Stainless Steel Grade 304 glass holding point
Height adjustable glass holding points (10mm)
Secure grip for the door
Self aligning suspension of door
Roller configuration for even distribution of load
Independently connected rollers to prevent damage to track and rollers
Suitable for 10mm or 12mm glass
Suitable for door weight 40kg.
Sliding End Sleeve
Grub screws to prevent the movement of track
Secure holding with the wall
Adjustment in wall holding point compensates drilling inaccuracies
Stainless Steel Grade 304
Finish: SSS