Over Panel Side Panel Connector With Fin
To hold left handed fin
Handing policy to be determined by looking from outside of the structure.
With pivot pin of 10mm diameter
Adjustable pivot point 55/65mm
Secure without cover
Material:-Stainless Steel Grade 304
Finish:- SSS
Glass to glass hinge 90°
Self Centering spring action from 35° to 90°
Hold open point at 90°
Stainless Steel Grade 304
Suitable for Glass Thickness 10mm / 12mm
Finish: SSS
Cover Plate for Track SL-44-B1
Cover plate suitable for OZ-SL-44-B1 Track
Hard plastic
Provided with grub screw and nut
Great look when the hollow track is covered
Prevents entry of dust, dirt etc. in to the track
As the drawings show(Five doors open to either side only).
The width of each glass door size should be less than 800mm
Panels Width/Height must be Calculated as per formula given below.
Above Gaps shown in elevation must be maintain during the installations.
ALREADY INCLUDED IN FORMULA
DO NOT DEDUCT SEPARATELY.
H= CLEAR HEIGHT FROM TOP OF TRACK TO FLOOR LEVEL
E= Should be less than or equal to 800
0.5W=Half of Clear width at site
Specification:
       Upper & lower door strips OMPS W-5
Fixed to Top/ Bottom of Sliding Panel Without Roller/Surface Bolt .
Casting Material:-Aluminium.
Cover Material:-SS-304
Finish:-SSS
OMPS-W SYSTEM SPECIFICATION
Sliding Folding System
Do not required space for making parking.
Each Panels move linearly into Aluminium top track Channel (75X75) of Aluminium Finish, hung with help of nylon roller fixed with top rail/Profile of SS-304 material and Aluminium Finish.
Each Panels are integrated to each-other with help of SS-304 hinges fixed at top/Bottom profile.
Top track of Aluminium (75X75),hung to MS structure or solid concrete (NOT IN OZONE SCOPE).
Bottom rail would be lock into the floor with dust excluding socket of SS-304.
Each would would be stack/park at designed(AS PER DESIGN PROVIDE BY OZONE DEPEND UPON THE DOOR CONFIGURATION).
Max Height:- 3000mmMax widht:- 1000mmMax Glass Thickness:- 12mm Toughened GlassMax Weight :-90kg
Specification:
       Upper door strip (hinge + roller) OMPS Z-3
Upper door strip with side hinge and roller).
Casting Material:-Aluminium Alloy.
Cover Material:-SS-304
Finish:-SSS
OMPS-W SYSTEM SPECIFICATION
Sliding Folding System
Do not required space for making parking.
Each Panels move linearly into Aluminium top track Channel (75X75) of Aluminium Finish, hung with help of nylon roller fixed with top rail/Profile of SS-304 material and Aluminium Finish.
Each Panels are integrated to each-other with help of SS-304 hinges fixed at top/Bottom profile.
Top track of Aluminium (75X75),hung to MS structure or solid concrete (NOT IN OZONE SCOPE).
Bottom rail would be lock into the floor with dust excluding socket of SS-304.
Each would be stack/park at designed(AS PER DESIGN PROVIDE BY OZONE DEPEND UPON THE DOOR CONFIGURATION).
Max Height:-3000mm Max widht:- 1000mm Max Glass Thickness:- 12mm Toughened GlassMax Weight :-90kg
Glass Connector
Strengthening glass structure
Straight line design for a modern look
With gaskets to prevent glass damage
Stainless Steel Grade 304
Finish:PSS/SSS
Converts existing manual sliding door/window into automatic
Suitable for residential applications
Accessories:
With 2 Nos. wireless push buttons/remote control
Best choice for professionals who wish to create pure beauty & graceful architecture
Manufactured as per ISO 9001:2000 standards
CE conformity & compliant with EU Standards EN 16005, EN 60335, EN ISO 13849 1:2008 & German standard DIN 18650
Exquisiteness combined with strength & soft performance
Ability to work with 20% higher or lower than nominal input voltage
Completely protected system input ports which reduces the damage risk due to human error during installation
Self-diagnose and error detection
Ability to automatically adjust speed and slopes according to input voltage change
Brushless Motor
1.5mm thick SS 316 cover plate
Cover plate secured with snap-fit mechanism
Base casting material : Alloy Steel
Gasket : Non-asbestos material
Spring Steel (Special Metal) snap-fit points for more strength
Strong cover which doesn’t come-off easily
Designed in compliance with EN 16005 Low Energy Operating Standard for 500,000 cycles
Slim Track Size (mm): (H)75 x (D)77 x (L)2000
Can be converted to semi-automatic & manual sliding system
1.5mm thick SS 316 cover plate
Cover plate secured with snap-fit mechanism
Base casting material : Alloy Steel
Gasket : Non-asbestos material
Spring Steel (Special Metal) snap-fit points for more strength
Strong cover which doesn’t come-off easily
Engine case height: 115mm
Self-learning microcomputer processing controller
Extra slim type track
24V DC 100 watt brushless motor with built-in rectifier
Adjustable parameters
Track length option:
4.2mtr / 6mtr
Accessories:
2 remotes are provided
Single sliding glass door for office, kitchen, living room and pocket doors
Elegant and slim design
Can be mounted on Glass, Wall and Ceiling
No cutout/holes required for glass doors
Internationally patented in Germany as per EN1527 standards
Roller tested for 100,000 cycles
Energy efficient - prevents AC loss by allowing minimum 5mm gap between sliding & fixed glass
1.5mm thick SS 316 cover plate
Cover plate secured with snap-fit mechanism
Base casting material : Alloy Steel
Gasket : Non-asbestos material
Spring Steel (Special Metal) snap-fit points for more strength
Strong cover which doesn’t come-off easily